The Base Cutter Set includes Base Cutters of different shapes and scales and rollers with spacers needed to create bases for miniature figures. You get the Base Cutters and Roller with Spacers (49 digital .stl files).
Use the Base Cutters and Roller with Spacers for your Tabletop DIY Terrain, Figures, Buildings and Bases and so on. Use them on Air-Drying Clay, Clays, or XPS Foam for example.
- 2-sided design! Use the "BOTTOM" side to cut out the base or base with texture and the other slightly smaller "TOP" side if you have a base and only want to add a texture on top.
- All files can be printed without supports as they are designed that way.
Sizes Overview:
Round Cutters: 25mm, 28mm, 32mm, 40mm, 50mm, 55mm, 60mm, 65mm, 100mm.
Oval Cutters: 60x35mm, 75x42mm, 90x52mm, 105x70mm, 120x92mm, 160x100mm, 170x105mm.
Square Cutters: 20mm, 25mm, 30mm, 32,5mm, 40mm, 50mm.
Rectangle Cutters: 50x25mm, 60x30mm, 60x40mm, 75x50mm, 100x50mm, 100x60mm, 150x50mm, 150x100mm.
Hex Cutters: 25mm, 2x25mm, 3x25mm, 7x25mm, 30mm, 2x30mm, 3x30mm, 7x30mm.
ROLLER WITH SPACERS
Also included in the "Base Cutter Set". To recreate the same and desired thickness again and again with a smooth surface for your bases, use the rollers with spacers. The bigger the spacer, the thicker your Layer for your base will become. If you only create smaller bases, you can go with a shorter roller, but if you may create bigger bases, then go with one of the longer versions.
Available Roller lengths: 11.5cm, 22cm, 26cm, 30cm.
Available spacer sizes: 0.25 cm, 0.3 cm, 0.325 cm, 0.5 cm, 0.75 cm, 1.0 cm, 1.25 cm, 1.5 cm, 1.75 cm, 2.0 cm, 2.25 cm, 2.5 cm. (The spacer sizes are included in 2 versions: MM and CM).
