igital file fulfilment for this object will occurr after the end of the Formidable Fronts Campaign finishes its funding period.
This zip file is the Hexhog Tabletop LLC Formidable Fronts release all files prefaced with FF-xxxxxx format. Files provided in standard, hollow, and hollow supported when applicable.
Trenches Designs:
FF-A01-000000-v1 -> Single Tank Trap Flat No Inserts
FF-A02-000000-v1 -> Double Tank Trap Flat No Inserts
FF-A03-000000-v1 -> Triple Tank Trap Flat No Inserts
FF-A04-000000-v1 -> Quad Tank Trap Flat No Inserts
FF-B01-100000-v1 -> Single Tank trap 1 Point Rise, 1 Rise Hex
FF-C01-110000-v1 -> Single Tank Trap 2 Point Single Rise Hex
FF-C02-110000-v1 -> Double Tank Trap 2 Point Single Rise Hex
FF-D01-111000-v1 -> Single Tank Trap 3 Point Single Rise Hex
FF-D02-111-00-v1 -> Double Tank Trap 3 Point Single Rise Hex
FF-D03-111-00-v1 -> Triple Tank Trap 3 Point Single Rise Hex
FF-L01-LNGTRN-v1 -> Long Side Piece, Closed Trench Perpendicular
FF-L02-LNGTRN-v1 -> Long Side Piece, Closed Trench Angle
FF-L03-LNGTRN-v1 -> Long Side Piece, Open Trench Perpendicular
FF-L04-LNGTRN-v1 -> Long Side Piece, Open Trench Angle
FF-S01-SRTTRN-v1 -> Short Side Piece, Closed Trench
FF-S02-SRTTRN-v1 -> Short Side Piece, Open Trench
FF-TE1-100000-v1 -> Trench End, Open Trench
FF-TE2-100000-v1 -> Trench End, Closed Trench
FF-TO1-111000-v1 -> Open Trench
FF-TR1-111111-v1 -> Trench
FF-TT1-110000-v1 -> Open Trench Turn, Small Side
FF-TT2-111100-v1 -> Open Trench Turn, Long Side
FF-TT3-111111-v1 -> Trench Turn
FF-TW1-222100-v1 -> Trench Steps Sides
FF-TY1-110000-v1 -> Trench Y Single Side
FF-TY2-111100-v1 -> Trench Y Two Side
FF-TY3-111111-v1 -> Trench Y
FF-YE1-111000-v1 -> Trench Y Single Trench End
FF-YE2-111100-v1 -> Trench Y Double Trench End
FF-YE3-111000-v1 -> Trench Y Single Trecn End, No Y grates
FF-YE4-111100-v1 -> Trench Y Double Trench End, No Y grates
Bunkers Designs:
FF-BD1-111111-v1 Trench Bunker Door Entrance
FF-BD2-111100-v1 Bunker Door Entrance
FF-BD3-BNKRDR-v1 Insertable Door
FF-BL1-111110-v1 Large Bunker Part A
FF-BL2-111110-v1 Large Bunker Part B
FF-BL3-110000-v1 Large Bunker Part C
FF-BL4-000000-v1 Large Bunker Part D
FF-BS1-111110-v1 Small Bunker Part A
FF-BS2-111110-v1 Small Bunker Part B
FF-BS3-110000-v1 Small Bunker Part C
FF-BR1-LBNKR-v1 Large Bunker Roof Part A
FF-BR2-LBNKR-v1 Large Bunker Roof Part B
FF-BR3-SBNKR-v1 Small Bunker Roof Part A(Mirror of other half)
FF-BR5-SBNKR-v1 Small Bunker Roof Part A
FF-BR6-LBNKR-v1 Small Bunker Roof Part A
Risers and Edges:
HT-AZ2-HEXRSR-v1, New Low Material Spanning Riser Option
FF-U01-EDGCTL-v1, Tall Edge Piece "C" Shape
FF-U02-EDGCTR-V1, Transition Edge Piece, "C" Shape
FF-V01-EDGDTL-v1, Tall Edge Piece "V" Shape
FF-V02-EDGDTR-v1, Transition Edge Piece "V" Shape
FF-W01-EDGDTL-v1, Tall Edge Piece "D" Shape
FF-W02-EDGDTR-v1, Tall Edge Piece "D" Shape
Files are grouped as follows:
hollow: Component files that have been pre-hollowed. 1.5mm to 2.5mm wall thickness, depending on interior geometry
hollow-supports: Component files that have been pre-hollowed and supported. 1.5mm-2.5mm wall thickness depending on interior geometry
standard: Standard files stls, no hollows, or printer type prep
Important: We strongly reccommend building hills one level at at time as the components are designed to fit snugly and trying to jam a piece in when pieces on layers above it are in place can be a frustrating adventure!
License for our files
Private Use Only
Non Commercial
No Derivatives distribution of any sort.
By downloading files from our MMF page, you are purchasing a non-distribution licence to use these files. You are not purchasing the intellectual property of the files nor the assets used in creating the files.
Do not under any circumstances share these files for free or commercially.
IMPORTANT: Rules, Terms and Conditions
All files and links we share with our backers are meant for you as supporter and no one else. By downloading content made by us (Stl files, Zips. etc), you accept this Agreement and agree to be bound by its provisions. If you do not accept or agree with these terms, do not download the content we provide:
Hexhog Tabletops LLC is the owner of the STL files. The STL files are copyrighted work belonging to Hexhog Tabletops LLC.
Hexhog Tabletops LLC grants you a non-transferable, non-exclusive license to use the files.
You may only use the content provided by us (Stl and their location Links) for personal use, and you are not allowed to distribute or sell them nor the prints.
You can cut/resize our files to fit better your printer or personal needs but you can't share those derivative works (along with the original files).
You can't edit our 3d Files (stl) or use portions of them to create new content for any sort of distribution, sale, or other disbursement.
Our models and miniatures, any other kind of 3d file we release or or portions of our files can't be used in any other project, Kickstarter, Patreon, or any other crowdfunding platform, website, or release.
You can't make molds of our models, reproduction or casting or any kind of mass production is prohibited.
You can take photos, make live streams and video with our printed files (ideally to Showing 3d printer results or painting examples or awesome battler reports!) as long as you state that the models have been made by us. In this case our MyMiniFactory Store / Campaign would be greatly appreciated. Also a courtesy cross-post on our discord channel is appreciated!
All copyrights belong to Hexhog Tabletops, No rights are assigned or transferred to the end-user. Our designs are protected by intellectual property laws.
Revision Notes
01_FF_Standard_v2.zip -> FF-U1-EDGCTL-V2, FF-V02-EDGEVTR-v2, FF-W01-EDGDTL-v2 corrections posted.
