From my Ks campaign "Fishing Village"
all the models in the photo were printed with Ender 3, Cura slicer 3.6.0 profile included in the package, scale 28mm.
Painting tutorial included
Settings
To reduce the supports to the maximum I printed everything with an overhang between 80 °-88 °, from time to time I chose depending on how many supports I saw in the slicer (Cura), clearly choosing 88 ° jutting parts having almost no support , they will be a little irregular in the lower part but with the clippers and a bit of sandpaper I solved it
try to be delicate when you remove the supports of the ground floor to avoid breakages,
I still put in the package also the base + ground floor version fused together.
Put the windows as shown in the diagram as they are all slightly different and tailor-made for that frame, some too precise will need a little adjustment with scissors.
I found the "support Z distance" setting in the supports section very important, because it allows us to distance the top of the support from the model a bit, making it easier to separate.
My setting:
Nozzle 0,4mm
Layer 0.2 mm
5% infill
1.2 mm walls
Support overhang angle from 80° to 88° (depend by the model)
Painting
in the painting tutorial I have indicated the Ral code of the necessary colors,so that we can easily find them or do them yourself
for any problem or support contact me at:
I will be happy to help you
