A modular set of gates that could be used for a cemetery or a garden or palace/mansion.
All three gates have been designed to have gates that open and close on hinges, this is done by printing the gates in two parts and glueing them together with the gates sitting in the hinges.
All modular parts have small slots to fit 2x1mm magnets to make the pieces connectable.
There are three different size pillars. Large, medium and small. Large pillars have magnet slots on top to fit a selection of four different accessories to decorate the pillars.
A Smaller nozzle is recommended for this one to get all the fence details, and also a good calibration of the first layer so things dont turn out flat and for the hinges to work.
The four decorations include:
Included Items:
Base Geometry:
- FencePlain_20mm
- FencePlain_40mm
- FenceWall_20mm
- FenceWall_40mm
- GateLarge
- GateMedium
- GateSmall
- PillarCorner
- PillarMedium
- PillarMediumCorner
- PillarMediumEnd
- PillarMediumStraight
- PillarMediumTIntersection
- PillarSmall
- PillarSmallCorner
- PillarSmallEnd
- PillarSmallStraight
- PillarSmallTIntersection
- PillarTall
- PillarTallEnd
- PillarTallStraight
- PillarTallTIntersection
- PillarTopBlank
- PillarTopGargoyle
- PillarTopGlobe
- PillarTopLamp
- TerminatorLarge
PrintVariation1 FDM:
Each model split into pieces to be printed with FDM.
You can find more of my items at my website at www.tabletopminis.com
For updates, mini painting and printing you can also follow me on:
facebook: www.facebook.com/tabletopminis3dprints
instagram: www.instagram.com/tabletopminiatures
