Castle Builder - Walls

3D printable Castle builder - STL files. High quality, real print, photos. For FDM / Resin 32mm - for Role Playing Games.

This chapter present walls for your castle.
There are 70 models here, 33 models of
assembled walls and castle wall tops, a list of
what the photos of printed, real objects and
renders represent below.

This is one of the main sections of my Castle builder, the walls are a very
important part of each castle. I played many options
how it can be, how best to build, how to connect models and
what can be built from it. I tried to minimize the number
of models so as not to overload you with this amount,
but this is how it turned out. In this section you will see
several options for walls, a 45-degree wall turn, an angular
wall protrusion, how to build first-level and second-level
walls - so everything is in your imagination.
There are several models with cut corners, if you are not
satisfied with the models from the core set, you can build your
own unique cube from elements with cut corners.
Well, finally, after finishing the starter design, i saw that most
likely not everyone will want to build their walls from small
pieces, and therefore ready-made solutions are needed - for you.
I separately assembled 2-level walls (16 models) and a top
for them (16 models) from these pieces, unfortunately only
renderings will be presented. Believe me the models are all
the same, just assembled from what is in the photo.
All models are tested, printed and presented in the photo.
Print, build and play.

- You can get acquainted with the project in full on Kickstarter, but it ended

- free test models

- Don't miss the new Kickstarter, at the time of publication
there are only 13 days left until the end