Striding Eagle Statue | 28mm/32mm Heroic

Rescued from the façade of a demolished building, this imposing stone eagle survives only as a digital ghost of lost monumental architecture, its deeply weathered feathers and heavy, brutalist talons captured mid-strike. We've put this raw optical scan through a rigorous multi-software engineering workflow, mathematically flattening the architectural plinth to ensure it sits perfectly flush on your gaming mat with zero digital cleanup required.

/// QUICK SPECS ///

Native Scale: 28mm/32mm Heroic (1:56). Note that it scales infinitely.

Geometry: 100% Manifold, Watertight, Flattened Base for absolute stability.

Surface Detail: High-Frequency Texture (Optimized for washes/dry-brushing).

Multi-Stage Engineering: Extracted from a heavy raw capture, meticulously cropped, mathematically flattened on the bottom, and put through rigorous watertight manifold processing and precise decimation to guarantee zero slicer crashes.

Print Difficulty: Medium (Requires supports for the overhanging beak, wingspan, and talons).

/// DEPLOYMENT SCENARIOS ///

The Tactical Line-of-Sight Blocker: At its commanding 75mm scale, it serves as dense, indestructible tactical line-of-sight blocking cover for infantry units during grimdark or historical skirmish games.

The Drop-and-Play Objective: Drop it into the center of a ruined city or medieval plaza as a highly thematic control point for tabletop RPGs, ready for drop-and-play action immediately after printing.

The 200mm Painter's Canvas: Scaled up to the included massive 200mm version, the deep stone texture acts as a perfect canvas for Speedpaints, heavy washes, and intricate dry-brushing.

/// FILES INCLUDED ///

Monument_Eagle_75mm_solid.stl (Clean, unsupported master file for universal scaling)

Monument_Eagle_75mm_support.stl (Fused pre-supported file for immediate plug-and-play resin printing)

Monument_Eagle_200mm_solid.stl (Clean, unsupported master file for universal scaling)

Restored and Remixed by Entropy Archives.

3D printing settings
/// SCALING GUIDE ///
This standalone Hero Asset is natively scaled to 28mm/32mm Heroic (1:56). However, the engineered surface detail allows for aggressive scaling without losing texture. Use these exact percentages in your slicer:

HO Scale (1:87): 64%

O Scale (1:48): 116%

28mm / 32mm Heroic (1:56): 100%

N Scale (1:160): 35%

/// RECOMMENDED PRINT SETTINGS ///

FDM: Print the solid versions at 0.12mm layer height to ensure the deep, weathered texture of the stone feathers is retained while hiding layer lines. Standard tree supports are mandatory based on the geometry to successfully print the underside of the massive wings and the heavy beak.

Resin: For the 75mm supported version, we have optimized the tilt angle backward to ensure heavy suction forces and support scaffolding connect strictly to the back of the wings, preserving the flat-base engineering and intricate frontward textures.

/// COMMERCIAL LICENSING ///
COMMERCIAL LICENSING This digital file is strictly for personal use. Selling physical 3D prints of this model, or any model in the Entropy Archives catalog, requires an active Commercial Merchant obtain legal rights to sell physical prints of our assets, join the Commercial Tier on Thangs: 

Restored and Remixed by Entropy Archives.