11Th Edition — Greater Good Complete Terrain Bundle

Explore all factions in our 11th Edition campaign

The complete Greater Good bundle for 11th Edition. A one-stop shop for all the Greater Good 11th Edition terrain: ML ruins, foldable scatter terrain, single and double containers, 2×4 pieces and terrain footprints.

The foldable pieces print preassembled, fold flat for storage and unfold when it is time to play. Print them in multicolour, or go monocolour and paint them however you like!

Files included — please download the latest ZIPs

• Colour-separated STL files for multicolour printing.

• Monocolour STL files.

• Ready-to-print Bambu Studio (.3mf) projects for multicolour and monocolour printing, prepared for the Bambu Lab P1S, H2D and A1 Mini.

Choose the project for your printer and preferred colour setup. Each prepared plate includes instructions stating how many times to print it. Follow those quantities to complete the set.

Come say hi to our discord server or ask any questions about the files: Discord Invite

️ Non-manifold / floating regions warning

The non-manifold or floating regions warning can be safely ignored. Still, always check the toolpath preview before printing, just to make sure your slicer is not doing anything unusual.

This warning appears because the files are built from multiple closed meshes, and some of those meshes share coincident triangular faces so the multicolour geometry lines up correctly. That can trigger a non-manifold warning, but slicers handle it cleanly and it should not affect print quality.

The floating regions are also intentional. Most of them are bridges required for the preassembled hinge mechanism, so they do not need supports.

️ About the colour-separated files

The files are kept colour-separated on purpose.

Most slicers allow you to combine or merge the parts into a single object for printing. If the files were exported only as one single STL, you would lose some slicer control, especially for things like Fuzzy Skin, which makes the stone texture look really nice on monocolour prints too.

For Cura: import the parts, select them, right click, then use Merge. If your slicer handles this differently and you get stuck, just let me know and I’ll help you figure it out.

++++++++++++++++++++++++

What to print for a complete Greater Good set

Choose one colour setup per project and follow its plate quantities. Monocolour and multicolour versions are alternatives, so you do not need to print both. Filenames below match the included STLs; colour-separated parts for a model must be printed together.

ML ruins — 8 pieces

Print two of each of the four ruin models. The prepared plate contains one of each: print your chosen colour plate twice.

• 2 × GREATER GOOD_D_MONO [AB].stl

• 2 × GREATER GOOD_E_MONO [EF] .stl

• 2 × GREATER GOOD_F_MONO [CD].stl

• 2 × GREATER GOOD_G_MONO [GH].stl

2×4 pieces — 4 pieces

Print two low pieces and two tall pieces. Print the prepared plate with one of each twice.

• 2 × GREATER GOOD_4x2x2_monocolor.stl

• 2 × GREATER GOOD_4x2x4_monocolor.stl

Foldable scatter terrain — 12 pieces

Print four A, four D, two E and two F. Print your chosen six-piece plate twice.

• 4 × GREATER GOOD_SCATTER_A_MONO.stl

• 4 × GREATER GOOD_SCATTER_D_MONO.stl

• 2 × GREATER GOOD_SCATTER_E_MONO.stl

• 2 × GREATER GOOD_SCATTER_F_MONO.stl

Containers — 2 double-container stacks + 2 single-container stacks

The standard container plate contains one A and one C. Print your chosen plate four times, as marked “print 4X”, for two double-container stacks and two single-container stacks.

• 4 × GREATER GOOD_CONT_A_MONO.stl

• 4 × GREATER GOOD_CONT_C_MONO.stl

The containers are stackable. Repeat the same designs or mix the available alternatives for variety, while keeping the required number of single- and double-container stacks. The printlist above is specific to this faction.

For an alternative single-container turret, print GREATER GOOD_CONT_B_PT1_MONO.stl and GREATER GOOD_CONT_B_PT2_MONO.stl together. Substitute this assembled alternative where appropriate instead of adding it to the standard printlist. The 55% objective-marker/turret plate is optional.

Terrain footprints

Use the full footprints or the matching split parts for smaller print beds. Follow the project instructions for your printer.

• 4 ×

• 4 ×

• 2 ×

• 4 ×

• 2 ×

️ Do not leave any 3D printed part in the sun or in very hot environments, like a car in summer. PLA’s glass transition temperature is around 60 ºC, so be careful with your prints if you do not want warping.

+++++++++++++++++++++++

The original L ruins and containers STLs for this faction were designed with help from my friend Alvaro. Waiting for him to open an stl shop in order to properly credit him. 

Happy 40k games, and good luck on the dice!

These files are provided for personal use only and may not be distributed or sold. This license allows for the printing and modification of terrain pieces for personal use in games and displays. Please do not share these files; respect the creator’s effort by keeping these to yourself.

Tinker Junkie is an independent creator and is not affiliated with or endorsed by LEGO or Games Workshop Ltd. ‘Warhammer 40,000’ is mentioned solely to indicate compatibility.