Last year, I was looking for something that could complement my beloved and ancient plastic model of the 16th century English sailship "Sovereign of the Seas". A friend recommended to me three famous drawings by the Dutch painter Willem van de Velde. They show the Dutch flagship, the “Brederode”, and her almost-identical sister ship, the “Aemilia”, after the three-days Battle of Portland in February 1653. The damaged Dutch ships are shown undergoing repairs and caulking in the harbor of Hellevoetsluis.
These drawings were the basis of this 1:168 scale 3D printable plastic kit. The kit was designed to meet five requirements:
1. The kit shall be 3D printable in 1:140 scale as well as 1:168 scale (same as the "Sovereign of the Seas").
2. The largest (hull) parts of the smaller, 1:168 scale, version shall still be printable on a old 220x220mm FDM printer plate, while the 1:140 scale version parts should be printable in multiple colors on a modern 4-color FDM printer with a 256x256mm plate.
3. The model kit shall contain no more than 500 separate parts. For instance, “Brederode” usually carried 56 guns and each involves at a minimum a carriage+barrel and a gun hatch.
4. When printing out the kit’s parts in larger than 1:140 scale, the details shall still be good enough to produce a worthwhile and presentable model in case there are lovers of a more majestic replica of the ship out there who also own FDM printers with more large-ish building plates of 300x300mm and above in size.
5. The finished model shall also be simultaneously useable for a virtual walk-through to anyone with a modest modern laptop.
So, here is my version of the “Brederode”, taken from Willem van de Velde’s sketches. I took some liberties because the ship in the drawings had been pretty banged up during the battle and some elements that would normally have been part of the ship had gone missing. A large piece of the decorative front section of the vessel for instance appears to have been shot off by the English, as had been all her upper masts. Where there are mismatches between the sketches and earlier depictions of the vessel, (especially regarding the aft panel decorations) I followed the van de Velde sketches, only using other sources, e.g. a painting by de Vlieger, when there was no choice.
This will not be my last plastic kit of a vessel from the Dutch 17th century. I would like to re-create some of the smaller vessels like the (then) Commodore de Ruyters first serious command, the “Haze”, or his flagship when leading a famous Dutch task force, the “Tijdverdrijf”. Both kits would be smaller and with fewer parts than the “Aemilia” or the “House of Brederode”.
Описания пока нет. Вы можете добавить его.