Aelair12 - Hybrid Soldier

 Miniature comes both supported and unsupported, on bases. Supports done with Lychee and a save file is included for easy changes.

MINIATURE RECOMMENDED PRINT SETTINGS 

Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None