This set contains 2 hull down tank tile sets
This is made to combine with trench of death #2 sets'.
1 current tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 10 minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
This basic set contains 4 tiles:
2 hull down tank trench tiles
2 tank ramp tiles
Tile size: The original basic tiles, without the sandbags and ground structure attempt are 117,5mm x 117,5mm x 33mm @100%, but I made them 10% bigger (110%) for this project, so they have a size of 132mm x 132mm x 42mm. You can scale them down or up, depending how narrow, wide or high you want them to be.
promo video 1:
promo video 2:
promo video 3:
