The lucifer measures 650x600 mm.
When weighed mine came to around 1.5kg before i added weapons.
In the process of test printing the supports i used 3.5L of Elegoo ABS like, but that included some failures on rather larger pieces so if you have a perfect print run it will use sub 3L i suspect.
Presupports were tested on a Uniformation GKtwo at 30nm, but were presupported to fit on a Mini8k from Phrozen, so most if not all pieces should be able to fit on a smaller printer.
I agressively hollowed all the pieces i could, so some filling will be required to cover up some resin escape holes. Alternatively i have included the .lys files so you can print solid pieces (at that point it will be heavy heavy)
BUILDING INSTRUCTIONS
i have included step by step renders to help the construction process, do not feel obliged to use all the lugs, they are mostly to align the pieces.
If you want the VTOL engines to remain mobile you will need some 10mm dowel to use as an axis. I used simple wooden dowel but im sure you could use other materials.
I will periodically add pieces to the Lucifer, this isnt to promise anything, but there are elements I'd like to make but ran out of time and energy by the end. All in all to say check back every so often as the parts list may grow.
PRESUPPORTS
the main chassis is presupported and hollowed, the rest of the components will be as well so if presupports are a must for every part I would invite you to check back in a month or so and they should all be done by then.
