11Th Edition — Imperial Gothic Complete Terrain Bundle

Explore all factions in our 11th Edition campaign

The complete Imperial Gothic bundle for 11th Edition. A one-stop shop for all the Imperial Gothic 11th Edition terrain: ML ruins, foldable scatter terrain, single and double containers, 2×4 pieces and terrain footprints.

The foldable pieces print preassembled, fold flat for storage and unfold when it is time to play. Print them in multicolour, or go monocolour and paint them however you like!

Files included — please download the latest ZIPs

• Colour-separated STL files for multicolour printing.

• Monocolour STL files.

• Ready-to-print Bambu Studio (.3mf) projects for multicolour and monocolour printing, prepared for the Bambu Lab P1S, H2D and A1 Mini.

Choose the project for your printer and preferred colour setup. Each prepared plate includes instructions stating how many times to print it. Follow those quantities to complete the set.

Come say hi to our discord server or ask any questions about the files: Discord Invite

️ Non-manifold / floating regions warning

The non-manifold or floating regions warning can be safely ignored. Still, always check the toolpath preview before printing, just to make sure your slicer is not doing anything unusual.

This warning appears because the files are built from multiple closed meshes, and some of those meshes share coincident triangular faces so the multicolour geometry lines up correctly. That can trigger a non-manifold warning, but slicers handle it cleanly and it should not affect print quality.

The floating regions are also intentional. Most of them are bridges required for the preassembled hinge mechanism, so they do not need supports.

️ About the colour-separated files

The files are kept colour-separated on purpose.

Most slicers allow you to combine or merge the parts into a single object for printing. If the files were exported only as one single STL, you would lose some slicer control, especially for things like Fuzzy Skin, which makes the stone texture look really nice on monocolour prints too.

For Cura: import the parts, select them, right click, then use Merge. If your slicer handles this differently and you get stuck, just let me know and I’ll help you figure it out.

++++++++++++++++++++++++

What to print for a complete Imperial Gothic set

The filenames below refer to the monocolour STLs. For multicolour printing, use the matching colour-separated parts or the prepared project. Print either the monocolour or the multicolour version of each piece, not both. Choose one colour setup in each project and follow its plate quantities.

ML ruins — 8 pieces

Print two of each of the four ML ruin models. Choose one colour setup, then print its four-piece plate twice.

• 2 × IMPERIAL GOTHIC_D_MONO [AB].stl

• 2 × IMPERIAL GOTHIC_E_MONO [EF] .stl

• 2 × IMPERIAL GOTHIC_F_MONO [CD].stl

• 2 × IMPERIAL GOTHIC_G_MONO [GH].stl

2×4 pieces — 4 pieces

Print two low pieces and two tall pieces. The prepared plate contains one of each: print it twice.

• 2 × IMPERIAL GOTHIC 2x4x2_MONO.stl

• 2 × IMPERIAL GOTHIC 2x4x4_MONO.stl

Foldable scatter terrain — 12 pieces

Print four A, four D, two E and two F. The prepared six-piece plate is labelled “print me TWICE”.

• 4 × IMPERIAL_SCATTER_A_MONO.stl

• 4 × IMPERIAL_SCATTER_D_MONO.stl

• 2 × IMPERIAL_SCATTER_E_MONO.stl

• 2 × IMPERIAL_SCATTER_F_MONO.stl

Containers — 2 double-container stacks + 2 single-container stacks

For Imperial Gothic, print four double containers and two of the single-container model. Stack the double containers in pairs. The single-container project already contains the two required prints: print your chosen colour plate once.

• 4 × CONTAINERS_MONOCOLOR.stl

• 2 × IMPERIAL GOTHIC SINGLE CONTAINER_monocolor.stl

The containers are stackable. You can repeat the same models or mix the available designs for more variety. The quantities above are specific to Imperial Gothic; the container designs and number of individual prints vary between factions.

The double-container archive contains monocolour and colour-separated STLs. Arrange four copies in your slicer for the printlist above.

Terrain footprints

Use the complete footprints or their matching split versions for smaller print beds. Follow the plate instructions in the project for your printer.

• 4 ×

• 4 ×

• 2 ×

• 4 ×

• 2 ×

️ Do not leave any 3D printed part in the sun or in very hot environments, like a car in summer. PLA’s glass transition temperature is around 60 ºC, so be careful with your prints if you do not want warping.

+++++++++++++++++++++++

Happy 40k games, and good luck on the dice!

These files are provided for personal use only and may not be distributed or sold. This license allows for the printing and modification of terrain pieces for personal use in games and displays. Please do not share these files; respect the creator’s effort by keeping these to yourself.

Tinker Junkie is an independent creator and is not affiliated with or endorsed by LEGO or Games Workshop Ltd. ‘Warhammer 40,000’ is mentioned solely to indicate compatibility.