Compound Metal Fence

We have a decent-sized modular set for you guys. It is one where you can make it as big as you want by printing as many pieces as you fancy.

It is a set of metal fences and opening gates made in an industrial sci-fi theme but a set that would also not look out of place in modern-day games.

There are three different versions of the fence, a normal one, one that is buckled and bent, and one that is bucked and torn. There are corner pieces so you can make the compound walls make 90-degree turns. The gates are made so each gate and post is the same length as a wall section and designed so you can use a single or a double gate.

The walls connect to each other using 3x2mm magnets to avoid having any plastic joins which would be likely to break off during use. You can also glue sections together, or glue a few parts together and then use magnets to connect larger sections. Up to you guys really!

INCLUDES:

-Compound Fence
-Buckled Compound Fence
-Torn Compound Fence
-Compound Gate
-Compound Gate Post and Joint Pin
-Compound Corner Post (Left and Right)

As always, they come laid flat for FDM and Fully Pre-supported for Resin printing!

***The mech you can see in the pictures can be found here https://www.myminifactory.com/object/3d-print-urban-dreadnought-409316