Ruined City - House Set 1

The Ruined City House Set is highly detailed with partly destroyed walls, broken windows, bricks that have dislodged from the wall and fell into the ground and plaster peeling off from the war ridden walls of this house.

This set builds 2 distinctly different houses, but can be used to create way more than 6 variations of the full building - The buildings work either as single pieces or can be put next to each other for "row house" look. See pictures for ways to assemble.

The set is modular, enabling you to assemble multiple different variations of the Ruined City House. The set builds either 1, 2 or 3 stories high apartment building / house. You can swap each level to a different one or use them as stand-alone pieces! The set can be built with roof or without roof.

Without roof I recommend adding sand or similar to the top of the wall to make it look more "natural". Each level included with built-in doors and without doors (Door also provided separately - might need some sanding to fit into the empty door slots).

Each level can also be fitted with a wooden flooring. These fit into wooden supports that are built-in to the walls of each floor. This enables you to switch out the floors on the second or third level, creating different gameplay challenges and vertical gameplay!

Remember to also check my other sets in the Ruined City terrain line.

All floors/roof have round pegs / peg holes - so they won't slid out of place when playing and so that you can access each level easily! Pegs can be removed with clips + replaced with magnets! (around 3-4mmx2mm per slot should fit)

Inside the set you will get (see pictures for full contents):
- 4 different bottom floors (with doors and without, with added brick rubble and without)
- 4 different middle floors (with doors and without, with more and less demolished walls)
- 2 different roof (with more demolished roof/walls and with less demolished roof/walls)

- 3x floor variation for smaller room inside the house (no, medium and highly damaged)
- 3x floor variation for larger room inside the house (no, medium and highly damaged)

- 1x Separate door
- 1x Separate wooden support pillar (can be attached to walls if you want extra support or to use the floor pieces for outside walls to create wooden walkways)

Scale: 28-32mm (miniature in the pictures is standing on a 25mm base and is approx. 45mm high)

Size information:

Largest piece: 192x223x77mm (width, depth, height - bottom level)
Set can be downsized down to ~80% if a smaller size is preferred.

Level difference height: around 3" (for that sweet elevated position bonus)

Printability: FDM recommended. Test printed on FDM. No supported or hollowed files for resin printing included. Test printed succesfully support free (versions with doors). Add tree supports to door frames if needed. 

Support free printing! For pieces with empty door frames supports are recommended (there might be slight sagging otherwise).

Assembly: See the pictures for reference!

This set is part of my December 2025 Tribes/Patreon releases.

Want to receive monthly Trench miniatures and terrain STLs and to support my work? Consider joining The First Trench Tribes / Patreon!

Click to check out my Tribes
Click to check out my Patreon
Check my Trench Terrain here
Check my Trench Miniatures here