Optional Towers for the Black Powder expansion of the Awaken Realms game The Great Wall. These were designed with the following goals in mind.
1. They are the same height as the 3D printed stacked walls when laid on their side to make storage easier.
2. Since the card on top of the tower doesn’t give much information they were not designed to fit them.
They come out quite a bit smaller than the originals but work great. The small size also makes the front of the walls a bit less cramped when a lot stuff is out there.
We’ve included a version with the full towers, a version with the floor and the walls of the towers separated for FDM printing, and a chitubox file that is presupported for resin printing. I recommend that if you print the presupported version you set your printer to very slow speeds as the file was printed with high suction portions in order to reduce the number of supports needed on faces. I also recommend running the files through UVTools as it is a remix and has some resin traps that were unavoidable.
These were designed by Solomon Steadman by remixing assets from the Easefare defense wall pack https://www.myminifactory.com/object/3d-print-195039.
We have released them to the community for free.
